-
DURAFire® Oil Igniter
Read moreThe DURAFire® air atomized No. 2 oil igniter features the only “protected primary combustion zone” design on the market. As a result this igniter is self-stabilized, highly reliable and requires virtually no maintenance. Atomization takes place at the rear of the igniter away from the heat of the tip resulting in no fouling or need for cleaning. Most applications require no igniter retraction reducing installation costs and ongoing maintenance.
-
Eagle Air II Coal/Gas Burner
Read moreForney in Conjunction with Storm Technologies brings you the Eagle Air II Burner!
Need the ability to fire both coal or natural gas so your plant can take advantage of the most cost effective fuel option? Eagle Air II is a Wall-Fired-Boiler Dual-Fuel Burner that gives you that flexibility.
-
Flexible Single Tube
Read moreThis Class I igniter is located in a tilting tangentially fired boiler adjacent to the main fuel nozzle.
As an oil igniter, the unique rear atomizer results in a single tube extending to the one piece tip. This design eliminates the need for atomizer maintenance.
As a gas igniter, the gas is directed to the tip through the single flexible tube. Stabilization is maintained by a 7.5 inch swirler which creates a low pressure zone just down stream of the nozzle. Combustion air is provided from the windbox.
Forney’s Flexible Single Tube (FST) Igniter provides multi-fuel, stable and reliable ignition for tangential burners utilizing a flexible design for optimal ignition with tilting nozzles.
-
HESI Igniter
Read moreThe HESI is a Class 3 Igniter used for direct spark ignition of oil or gas igniters, small burners, and combustion turbines. The Standard HESI is FM approved and the CE Version meets the Low Voltage.
-
Horn Igniter
Read moreThe Forney horn igniter is designed to be a direct replacement for the OEM igniter on tangentially fired boilers. This igniter features improvements such as the high energy spark igniter (HESI), optical flame detector and the ignition air distribution ring. These three features combine to produce a highly reliable igniter. The HESI produces a consistent spark due to its foul resistant design, while the optical detector proves flame without physical contact.
Forney’s horn igniter offers reliable single or dual fuel ignition and warm-up for tangentially fired burners and is designed for maximum flame stability and detection.
Designed for maximum flame stability on tangentially fired burners, Forney’s horn igniter offers reliable
The Forney horn igniter is used on tangentially fired boilers for burner ignition and warm up, typically as a Class 2 igniter. Depending on customer needs, Forney offers either a single or dual fuel horn igniter. The single fuel horn igniter fires either oil or gas. The dual fuel horn igniter fires either oil or gas without a change of equipment, allowing for a quick and effortless change over of fuel.
Both horn igniter assemblies consist of a mounting plate, an oil or gas gun for the single fuel horn igniter or a combination oil and gas gun for the dual fuel horn igniter, a High Energy Spark Igniter (HESI), a combustion air tube, an optional flame detector, and a horn. The major components are fastened to the igniter front plate with easily removable connections to simplify maintenance. The oil and gas connections utilize stainless steel braided hoses and optional quick disconnect couplings.
The optional flame detector is mounted on a 1” NPT sight tube, which provides an unobstructed view of the flame inside the horn. Since the etector is mounted to the igniter windbox, it does not require cooling air. On retrofit applications, the existing horn (diffuser) may be reused, if it is not damaged or deteriorated. As a result, the installation requires only replacing the front plate and internal hardware, minimizing costs.
single or dual fuel ignition and warm-up.
-
MaxFire® Gas Igniter
Read moreThe MAXFire® 100 Series gas igniter incorporates the “protected primary combustion zone” design in each of the 5 capacities available. The ignition process starts inside the guide tube away from the the burner environment resulting in an extremely stable and reliable igniter. Capacities (nominal) range from 1 mmBtu/hr to 50 mmBtu/hr.
-
PAF Burners
Read moreForney Parallel Air Flow (PAF) burners are custom engineered for a wide range of heat inputs while providing the flexibility of firing a variety of fuel types.
-
PAF II Low NOx Burners
Read moreThe HESI is a Class 3 Igniter used for direct spark ignition of oil or gas igniters, small burners, and combustion turbines. The Standard HESI is FM approved and the CE Version meets the Low Voltage Directive and Electromagnetic Interference Immunity Directive. An ATEX version is also available.
Forney’s High Energy Spark Igniter (HESI) provides a highly reliable, non-fouling source of ignition for oil or gas igniters or small burners.
-
Q87 Igniter
Read moreThe Q87 igniter is the best choice when dual fuel (natural gas and No. 2 oil) is required. With a change-out of the internals, the Q87 can switch from firing one fuel to another. It is also the choice when both air and steam atomization is required for No. 2 oil. The Q87 is 4 inches in diameter with a self-stabilizing diffuser and a high energy spark igniter.
Th e Q-87 oil or gas igniter off ers a fully self-contained fl exible solution for robust and reliable burner ignition, stabilization and warm-up.
-
SCR Reheating
Read moreForney provides multiple options to ensure SCR efficiency at lower inlet operating temperatures. Our in-duct, external duct and perimeter fired burners provide unique solutions for this harsh environment.
